manualshive.com logo in svg
background image

UPFLOW/DOWNFLOW CASED EVAPORATOR COIL 

INSTALLATION INSTRUCTIONS

EVAPORATOR COIL SAFETY

Recognize this symbol as a safety precaution.

Recognize Safety Symbols, Words and Labels

The following symbols and labels are used throughout this 
manual to indicate immediate or potential hazards. It is the 
owner’s responsibility to read and comply with all safety 
information and instructions accompanying these symbols. 
Failure to heed safety information increases the risk of serious 
personal injury or death, property damage and/or product 
damage.

IMPORTANT: The United States Environmental Protection Agency 
(EPA) has issued various regulations regarding the introduction and 
disposal of refrigerants in this unit. Failure to follow these regulations 
may harm the environment and can lead to the imposition of 
substantial fines. These regulations may vary by jurisdiction. A 
certified technician must perform the installation and service of this 
product. Should questions arise, contact your local EPA office.
This product is designed and manufactured to permit installation 
in accordance with national codes. It is the installer’s 
responsibility to install this unit in accordance with national codes 
and/or prevailing local codes and regulations.

INSTALLATION REQUIREMENTS

These instructions are intended as a general guide only for use by 
qualified persons and do not supersede any national or local 
codes and regulations in any way. Compliance with all local, 
state, or national codes and regulations pertaining to this type of 
equipment should be determined prior to installation.
Read this entire instruction manual, as well as the instructions 
supplied in separate equipment, before starting the installation.
All models are designed for indoor installation only.
Install the conditioned air plenum, ducts and air filters (not provided) 
in accordance with NFPA 90B Standard for the Installation of Warm 
Air Heating and Air-Conditioning Systems (latest edition).
Air filters (not provided) must be listed as Class 2 furnace air filters.

Whirlpool

®

 Models: WCC

WPIO-284B

Table of Contents

EVAPORATOR COIL SAFETY .......................................................1

INSTALLATION REQUIREMENTS ................................................1

Tools and Parts ............................................................................2
System Requirements ..................................................................2
Location Requirements ................................................................2
Drain Requirements......................................................................2

INSTALLATION INSTRUCTIONS ..................................................2

Inspect Shipment .........................................................................2
Install Upflow/Downflow Evaporator Coil ....................................2
Install Condensate Drains ............................................................3
Verify Orifice Size .........................................................................3
Connect Refrigerant Lines............................................................3

ASSISTANCE OR SERVICE ...........................................................4

Accessories ..................................................................................4

Hazards or unsafe practices could result in property
damage, product damage, severe personal injury or death. 

Hazards or unsafe practices may result in property
damage, product damage, personal injury or death. 

WARNING

CAUTION

Hazards or unsafe practices may result in property
or product damage. 

CAUTION

Installation and repair of this unit should
be performed ONLY by individuals meeting
the requirements of an “Entry Level Technician”
as specified by the Air-Conditioning, Heating and
Refrigeration Institute (AHRI). Attempting to
install or repair this unit without such background may 
result in product damage, personal injury or death.

WARNING

HIGH VOLTAGE!

WARNING

Disconnect ALL power before servicing.

Multiple power sources may be present.

Failure to do so may cause property damage, 
personal injury or death.

Содержание WCC

Страница 1: ...s type of equipment should be determined prior to installation Read this entire instruction manual as well as the instructions supplied in separate equipment before starting the installation All models are designed for indoor installation only Install the conditioned air plenum ducts and air filters not provided in accordance with NFPA 90B Standard for the Installation of Warm Air Heating and Air ...

Страница 2: ...d left front drain connections when installed in the horizontal position Minimum copper or PVC drain lines are recommended NOTE Check local codes before connecting drain lines to an existing drainage system A field fabricated auxiliary drain pan with a drainpipe to the outside of the building is required in all installations over a finished living space or in any area that may be damaged by overfl...

Страница 3: ...o the plastic drain pan Typical drain pipe routings to avoid interference with vent piping are shown in the Typical Drain Pipe Routing illustration Typical Drain Pipe Routing VerifyOrificeSize IMPORTANT The proper orifice size is dependent on indoor coil outdoor unit combination and application Consult the outdoor unit information to determine if the indoor unit has the correct orifice installed C...

Страница 4: ...tailpiece has cooled verify the position of the white Teflon seal and hand tighten the nut 12 Torque the nut to 20 to 30 ft lbs 2 77 to 4 15 m kg 13 Replace the suction line grommet and insulation ASSISTANCE OR SERVICE If you need further assistance you can write to the below address with any questions or concerns Whirlpool Home Cooling and Heating 14610 Breakers Drive Jacksonville FL 32258 Please...

Отзывы: