Whirlpool WBM35LS, Руководство по обслуживанию

Страница: 22 / 35

MSEX0025_rev01 21
Located at the back of these refrigerators, the basic function of Clean Back is to esthetically improve the
back of the product.
Important
Never block the Clean Back upper air circulation vents, as it will affect the
performance of the product.
Should there be a need to replace it or access the condenser, see the procedure in item 6.10 – Replacing
or Removing the Clean Back.
5.13 – Can Rack
Located in the Refrigerator Door, the Can Rack, is a support
to store cans easily, it was developmented for stores up six
cans simultaneously.
Note: The Can Rack, is not available for the
WRM34, WBM35 models.
5.14 – Capacitor
This is a march capacitor with a capacity of 5
µ
F , its function is help the compressor works efficient and not
to execute startup
To replace it remove the metallic Cover of the power module to access its fastening nut.
6 – COMPONENT ASSEMBLING, DISASSEMBLING AND REPLACEMENT:
In order for some functional components to be replaced it is necessary to disassemble the Evaporator
covers. Then, see the procedures to disassemble them and to replace components:
6.1 – Disassembling the Evaporator Front and Rear Covers:
Capacitor