18
8.
Reinstall hinge and latch on
opposite sides
Using a T25
®
screwdriver, reinstall the latch plate, latch
backing plate, and hinge assembly on the opposite sides
from which they were removed.
7.
Remove hinge and latch
Using a T25
®
screwdriver, remove the 3 screws securing the
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
Hinge
Latch
6.
Rotate and reassemble outer window
assembly to trim ring
With the edge with 2 notches at the top, align the notches on
the outer window assembly with the tabs on the trim ring and
lower into place as shown in figure A.
Rotate the outer window assembly counterclockwise to lock
tabs into place (figure B). Using a Phillips screwdriver, secure
with 2 screws removed earlier.
IMPORTANT
: Do not overtighten.
Fig. A
Fig. B
Bottom
of door
Notches
