Whirlpool W10597594C, Инструкция пользователя

Страница: 19 / 48

19 19 19 19 19 19
■
Reverse osmosis water filtration system connected to
your cold water supply? This can decrease water pressure.
See “Water Supply Requirements.”
Water is leaking from the dispenser system
NOTE: One or two drops of water after dispensing is normal.
■
Glass not being held under the dispenser long enough?
Hold the glass under the dispenser 2 to 3 seconds after
releasing the dispenser lever.
■
New installation? Flush the water system. See “Water
Dispenser.”
■
Recently changed water filter? Flush the water system.
See “Water Dispenser.”
■
Water on the floor near the base grille? Make sure the
water dispenser tube connections are fully tightened.
See “Refrigerator Door(s) and Drawer.”
Water from the dispenser is warm
NOTE: Water from the dispenser is only chilled to 50°F (10°C).
■
New installation? Allow 24 hours after installation for the
water supply to cool completely.
■
Recently dispensed large amount of water? Allow 24 hours
for water supply to cool completely.
■
Water not been recently dispensed? The first glass of
water may not be cool. Discard the first glass of water.
■
Refrigerator connected to a cold water pipe? Make
sure the refrigerator is connected to a cold water pipe.
See “Water Supply Requirements.”