Whirlpool TDLRS 6240SS EU/N, Руководство пользователя

Страница: 42 / 64

PROGRAMMES
For choosing the appropriate programme for your kind of
laundry, always respect the instructions on the care labels
of the laundry. The value given in the tub symbol is the
maximum temperature possible for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic fibres and mixed fibres.
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Colours
White and pastel shaded garments made of delicate fabrics.
Gentle wash programme to avoid graying or yellowing of your laundry.
Use heavy duty detergent, if necessary also stain removers or bleaches on
oxygen basis. Do not use liquid detergent.
Wool
All wool garments can be washed using programme ‚ “Wool“ even
those carrying the “hand-wash only“ label. For best results, use special
detergents and
do not exceed max kg declaration of laundry
.
Spin
Spins the load then empties the water. For robust laundry.
Rinse + Spin
Separate rinse and intensive spin programme. For robust
laundry.
Delicates
For washing particularly delicate garments. Preferably turn garments
inside out before washing.
Hygiene
This program removes 99 % of bacteria while washing normally to heavily
soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Synthetics
For washing soiled garments made from synthetic fibres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
Rapid 30’
Shortly worn clothing made of cotton, polyester, polyamide and blends
with cotton. Brief programme to refresh your laundry.
Cotton
Normally to heavily soiled and robust cottons.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton“ programme
at a temperature of 95°C. Pour a small quantity of detergent powder into
the main wash compartment of the detergent dispenser (maximum
1/3 of the quantity the detergent manufacturer recommends for lightly
soiled laundry). Start the programme without adding any laundry .
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS“ section. Load the laundry, close the drum door and check that
it is closed properly. Pour in the detergent and any additives. Observe the
dosing recommendations on the detergent pack. Close the lid. Turn the
programme selector to the desired programme and select any option if
needed. The display shows the duration of the selected programme (in
hours and minutes), and the indicator for the “Start/Pause“ button
flashes. The spin speed can be changed by pressing the “Spin“ button.
The indicator of the predefined spin speed lights up. Open the tap and
press the “Start/Pause“ button to start the wash cycle. The “Start/
Pause“ indicator will lights up and the door will be locked. Due to
variations in load and temperature of inlet water, the remaining time is
newly calculated in certain programme phases. If this is the case, an
animation appears on the time display.
PAUSE OR CHANGE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause“
button
, the indicator
light blinks. Select any new programme, options or spin speed if you wish
to change those settings. Press the “Start/Pause“ button again to start
the wash cycle from the point at which it was interrupted. Do not add
detergent for this programme.
LID OPEN INDICATOR
Before starting and after the end of a programme, the “Lid open“
indicator lights to show that the lid can be opened. As long as a wash
programme is running, the lid remains locked and must on no account
be forced open. In case you have an urgent need to open it during a
running programme, for example to add more laundry, or to remove
laundry which was loaded by mistake, press the “Start/Pause“
button. If the temperature is not too high, the “Lid open“ indicator
light turns on. It may last a while until you can open the lid. Press “Start/
Pause“ to proceed with the programme again.
PROGRAMME END
The “Lid open“ indicator lights up and the display shows .Turn
the programme selector to the “O“ position and close the water tap.
Open the lid and drum and unload the machine. Leave the Lid open
for some time to allow the interior of the machine to dry. After about a
quarter of an hour, the washing machine will switch off completely to
save energy.
To cancel a running programme before the end of cycle, press the
“Reset/Drain“ button for at least 3 seconds. The water is drained out.
It may last a while until you can open the lid.
OPTIONS
! When the combination of programme and additional option(s) is not
possible, the indication lights switch off automatically.
!
Unsuitable combinations of options are deselected automatically.
Colours 15°
Saves energy used for water heating while maintaining a good wash
result. Supports colour maintenance when washing coloured laundry.
Recommendable for lightly soiled laundry without stains. Make sure that
your detergent is suitable for cold wash temperatures.
Fresh Care
Select this option if you cannot unload the laundry soon after
programme end, or if you tend to forget the laundry in your washing
machine. It will help to keep your laundry fresh. The washing machine
will start to tumble the laundry periodically after programme end. The
light of the “Fresh Care“ button will blink while this function is active,
and the display will show an animation. The periodic tumbling will last up
to approximately 6 hours after the end of your wash programme, and you
can stop it at any time by pressing the “Fresh Care“ button. It will last
a while until you can open the door. After the “Fresh Care“ period has
run out, the display indicates .
Start delay
To set the selected programme to start at a later time, press the “Start
delay“ button to set the desired delay time. The lamp for the
“Start delay“ option button lights up, and it goes off when the
programme starts. Once having pressed the “Start/Pause“ button,
the countdown of the time delay begins. Number of hours pre-selected
can be reduced by pressing the “Start delay“ button again. Do not
use liquid detergent when activating this option.
To cancel the “Start
delay“ turn the programme selector to another position.
Rapid
Enables quicker washing by shortening the programme duration.
Recommendable for small loads or only lightly soiled laundry.
Prewash
Only for heavily soiled loads (for example sand, granular dirt). Increases
the cycle time by approximately 15 min. Do not use liquid detergent for
the main wash when activating the Prewash option.
Energy saver
With a lower temperature and slightly modified washing duration, the
optimum combination of excellent washing results
and even lower energy consumption is achieved.
Intensive rinse
Helps to avoid detergent residues in the laundry by extending the rinse
phase. Particularly suitable for washing baby laundry, for people suffering
from allergies and for areas with soft water.
Spin
Every programme has a predefined spin speed. If you want to change the
spin speed, press the “Spin“ button. If spin speed “0“ is selected, the
final spinning is cancelled but intermediate spin peaks remain during the
rinse. The water is drained out only.