10
INSTALL THE FLEXIBLE HOSE(
optional
Flexible hose)
Duct hole
Outdoor
Flexible hose
Flexible connector
Flexible hose clip
Connect the narrow end of the
connector to the dryer duct pipe
mouth at the back of the dryer.
Then connect the flexible hose to
the wide end of the connector.
Use the clip to fasten connection
point between the flexible hose
and connector (fasten clip with a
screwdriver). Extend the flexible
hose through the duct hole, make
sure the flexible hose is not twisted to
allow the air to be vented outside.
Notes: If duct hole is not available at user's home, make sure the flexible hose
is vented through a window.
Correct fixing mode:
Fig.1
Fig.2
Fig.3
(diameter
＞
100mm)
The flexible hose should be angled or ensure a vent cap is fitted when
vented outside to avoid water running back into the dryer.
Vent cap
INSTALLATION INSTRUCTIONS
