Attention:
1.Before operation, clean off any dust and dirt inside the drum of the dryer with
a damp towel.
2.Clean off any debris on the lint filter and in the duct to increase the drying efficiency.
Turning on power
Before turning on the power of the dryer, check:
- Whether the supply voltage is in accordance with the value indicated on the name plate.
- The dryer must be grounded securely.
Treatment of laundry to be dried
- The dryer can only dry laundry which has been spun dry. Do not put in laundry
which is still dripping wet or has excess water.
- Make sure all pockets are empty before placing laundry in the dryer.
- Pull up zippers, mend loosened fasteners and tie up ribbons to prevent the
laundry from being entangled. If necessary, put small items in a laundry bag.
-
To achieve a better drying result, ensure sort your laundry according to their
types and thicknesses. Dry the same types of items together.
Warning
：
1. Laundry items with metal attachments
may damage your dryer.
2. Do not dry items such as woollen,
silk and nylon stockings, delicate
embroidered fabrics in the machine.
3. Do not put an excess amount of
laundry into the dryer to avoid
damage to the dryer or laundry.
4. Do not dry shoes or other rubber
items in the dryer.
13
- Check whether the laundry to be dried is suitable to be placed in the dryer.
OPERATING INSTRUCTIONS
Reference weight of fabrics for drying
Overalls
(cotton appr 950g)
Jeas (800g)
Pajamas
(appr 200g)
T-Shirt
(appr 300g)
Shirts
(appr 300g)
Blended fabric
clothes
(appr 800g)
Woollen blankets
(appr 3000g)
Jackets (cotton
appr 800g)
Single bed sheets
(cotton appr 800g)
Underwear
(appr 70g)
Socks
(blended fabrics)
appr 50g)
7.
Turning off the dryer
T
urn the program knob to the “OFF” position and turn the power off at the wall.
Note:
Clean the filter after each load.
6. Program completion
If the display screen display “0.09”, the program comes into the cool phase. After the
program is complete, the dryer will stop tumbling and the display screen will
display “End”. Open the door and remove the laundry.
If the laundry is not removed, the dryer will automatically commence an
"anti-crease" protection cycle to keep your laundry from settling in one position
and creasing. This cycle will last an hour unless the door is opened. The dryer
will run with cool air at set intervals. To stop the anti-crease cycle press the
start button or open the door, empty the dryer and turn off as shown below.
