Whirlpool PROD 06SCII, Руководство по установке и обслуживанию

Страница: 22 / 40

22
MECHANICAL INSTALLATION
POSITIONING THE TUMBLE DRYER
The tumble dryer can be installed free-stan-
ding, built-in or stacked on top of a washing
machine. Remember that the dryer generates
heat and should not therefore be placed in a
room that is too small. If the room is very small,
drying will take longer due to the limited volu-
me of air.
TIP!
To improve the air supply, leave open the door
of the room in which the dryer is placed.
WARNING!
Electrical installation must be carried out by a
qualified electrician.
A. Free-standing
The tumble dryer can be placed next to the
washing machine. The dimensions of the tum-
ble dryer are:
Start
P3
P1
P2
P4
Stop
P5
P8
P6
P7
595 mm
585 mm
850 m
m
TUMBLE DRYER MECHANICAL INSTALLATION
min 600
min 850
120
140
10
3
140
1
3
5
120
B. Built-in
The tumble dryer can be built in under a work-
top with a minimum height of 850 mm. The
gap must be at least 600 mm wide.
C. Stacked
The tumble dryer can be stacked on top of an
Whirlpool washing machine. Use the stacking
kit that is supplied with the machine:
2 plastic holders. Plastic bag inside the drum.
2 metal tip guards. Attached to the lower back
of the machine.
An optional pull-out top can be purchased
from your Whirlpool dealer: Art no. 80 619 07-
0 (white) and 80 619 07-26 (black).