Whirlpool KitchenAid KHID4 77510, Руководство пользователя

Страница: 15 / 20

- Do not use steam cleaners.
- Before cleaning, make sure that the cooking zones are switched off and the residual heat
indicator (“H”) is not displayed.
IMPORTANT: Do not use abrasive sponges or pan scourers as these could damage the surface of the
glass.
• Clean the hob after every use (wait until it has cooled down first) to remove any food residues.
• Sugar and foods with a high sugar content may damage the hob and must be removed immediately.
• Salt, sugar and sand can scratch the surface of the glass.
• Use a soft cloth, absorbent kitchen towel or a specific hob cleaner (follow the manufacturer’s
instructions).
WARNING
15
• Read and follow the instructions given in the “Instructions for use” section.
• Check that the electricity supply has not been cut off.
• Dry the hob thoroughly after cleaning it.
• If alphanumeric codes appear on the display when the hob is switched on, consult the following
table for instructions.
• If you are unable to switch off the hob after using it, disconnect it from the power supply.
FAULT CODE DESCRIPTION POSSIBLE CAUSES REMEDY
C81, C82 The control panel has
switched off because of
excessively high
temperatures. The internal
temperature of the
electronic components
is too high. Wait for the hob to cool
down before using it
again.
F42 or F43 The connection voltage
is incorrect. The sensor has
detected a discrepancy
between the appliance
voltage and that of the
mains supply. Disconnect the hob
from the mains and
check the electrical
connection.
F12, F21, F25, F36, F37,
F40, F47, F56, F58, F60 Call our after-sales service and state the fault code.
Induction hobs can make whistling or crackling sounds during normal operation – these actually come
from the pots and pans and are caused by the characteristics of their base (e.g. whether the base is
made from several layers of material or is uneven). These noises vary depending on the pots and pans
used and the amount of food they contain, and they do not indicate a defect of any kind.
The induction hob is also equipped with an internal cooling system to control the temperature of its
electronic components. This means that, during operation and for several minutes after the hob has
been switched off, you will be able to hear the cooling fan running. This is perfectly normal and indeed
essential for the appliance to work correctly.
Noises made by the hob
Troubleshooting
Cleaning