Whirlpool GLT3014G, Руководство пользователя

Страница: 16 / 44

2-4
INSTALLATION
1. Glass Cooktops Only: Remove the foam
strip from the literature package and apply
the strip around the bottom edge of the
glass maintop so it is flush with the edges.
Burner Box
Foam Strip
Glass Maintop
2. Remove the two screws from the left and
right bottom edges of the burner box, then
place the brackets on top of the box.
Position the brackets as shown and hand-
tighten one screw into each bracket.
Front of
Cooktop
3. Install the cooktop into the countertop
opening so that the front edge of the
cooktop glass is parallel with the front
edge of the countertop. NOTE: To prevent
scratching the countertop, lift the entire
cooktop to make any position adjustments.
4. Rotate the brackets away from the burner
box and install a second screw into each
bracket, then securely tighten the bracket
screws to the burner box (see the illustra-
tion in step 5).
5. Install the 2-1/2
"
(6.4 cm) clamping screws
into the brackets and tighten them so that
they are firmly against the underside of the
countertop. DO NOT overtighten the
screws.
6. Install the pressure regulator with the ar-
row on the regulator pointing up toward
the burner box so you can reach the ac-
cess cap.
Gas Flow Arrow
Pointing Up
Access
Cap
Rear of
Cooktop
Pressure
Regulator
Glass Maintop
Countertop
Burner Box
Bracket
Screws
Bracket
2-1/2
" (6.4 cm)
Clamping Screw
Bracket