3-8
REMOVING THE POWER SUPPLY CORD
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
5. If installed, cut the wire tie from around
the gas manifold and the power supply
cord wires.
6. Remove the twist-on connectors from the
black and white power supply cord wires
and separate the wires.
7. Remove the chassis screw from the pow-
er supply cord green ground wire.
8. Remove the power supply cord strain re-
lief from the chassis hole and remove the
cord from the unit.
Ground Wire Screw
Strain Relief
Wire Tie
Twist-On Connectors
(Black & White Wires)
1. Unplug cooktop or disconnect power.
2. Turn off gas supply to cooktop.
3. Remove the grates and pull the control
knobs off the gas valve stems.
4. Remove the screws from the control pan-
el, then lift and remove the control panel
from the unit.
4 Screws
Control Panel
Knobs
Содержание GLS3064RS
