Whirlpool GJC3034G, Руководство пользователя

Страница: 25 / 42

4-3
2A 2B
1A 1B
2A 2B
1B
1A
LIMITERS
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
WARNING
Test Procedure
To test a limiter, perform the following steps:
1. Use an ohmmeter and set the range switch
to R x 1.
2. Disconnect the wires from the limiter you
wish to test.
3. Touch the ohmmeter leads to the indi-
cated limiter terminals. You should obtain
the following readings:
1A to 2A = Continuity (closed contacts)
1B to 2B = Infinity (open contacts)
ELEMENTS
Electrical Shock Hazard
Disconnect from electrical supply before ser-
vicing unit.
Failure to do so could result in electrical
shock or other personal injury.
WARNING
Test Procedure
To test an element, perform the following steps:
1. Use an ohmmeter and set the range switch
to R x 1.
2. Disconnect the wires from the element
you wish to test.
3. Touch the ohmmeter leads to the element
terminals. You should obtain the following
readings:
LF element:
1000 W = 58
Ω
.
1400 W = 41
Ω
.
LR element (1200 W) = 47
Ω
.
RF element (1500 W) = 37
Ω
.
RR element (1800 W) = 31
Ω
.
Element
Limiter
Terminal
Block
Terminals
Model GJC3634G shown.