13
EN
CLEANING THE FILTERS IN THE WATER INTAKE HOSE
1
.
Close the water tap and unscrew the intake hose.
1
2
2
.
Thoroughly clean the mesh filter at the end of the hose using a
brush.
3
.
At this point, manually unscrew the intake hose from the back
of the washer dryer. Using pliers, extract the mesh filter from the
valve on the back of the washer dryer and clean it.
4
.
Re-insert the mesh filter. Reconnect the intake hose to the
water tap and the washer dryer. Do not use tools to connect the
intake hose. Open the water tap and check to make sure that all the
connections have been tightened properly.
2
1
