Whirlpool ED5FHAXVT - 25' Dispenser Refrigerator, Инструкция по использованию и уходу

Страница: 12 / 40

12
Base Grille Water Filtration System
This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of
the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for
water leaving the system, as specified in ANSI/NSF 42/53.
Model WF-NL240V/NL240V Capacity 240 Gallons (908 Liters)
Model WF-L400V/L400V Capacity 400 Gallons (1514 Liters)
■
It is essential that operational, maintenance, and filter
replacement requirements be carried out for the product to
perform as advertised.
■
Model WF-NL240V Change cartridge at least every 6-9
months. Use replacement cartridge NL240V, part #4396509.
2004 suggested retail price of $35.99 U.S.A./$59.95 Canada.
Prices are subject to change without notice.
■
Model WF-L400V The filter monitor system measures the
amount of water that passes through the filter and alerts you
to replace the filter. When 90% of the filter’s rated life is used,
the filter indicator light changes from green to yellow. When
100% of the filter’s rated life is used, the filter indicator light
changes from yellow to red, and it is recommended that you
replace the filter. Use replacement cartridge L400V, part
#4396509. 2004 suggested retail price of $35.99 U.S.A./
$59.95 Canada. Prices are subject to change without notice.
■
The product is for cold water use only.
■
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system.
■
Refer to the front cover or “Assistance or Service” section for
the Manufacturer’s name, address and telephone number.
■
Refer to the “Warranty” section for the Manufacturer’s limited
warranty.
Substance Reduction
Aesthetic Effects NSF Reduction
Requirements Average
Influent Influent Challenge
Concentration Maximum
Effluent Average
Effluent Minimum %
Reduction Average %
Reduction NSF Test
Number
Chlorine Taste/Odor
Particulate Class II
*
≥
50%
≥
85%
2.0 mg/L
833,333/mL 2.0 mg/L ± 10%
At least 10,000
particles/ml 0.03 mg/L
100,000/mL** 0.02 mg/L
40,667/mL 98.5%
88.0% 99.0%
95.1% 504232-01
507163-02
Contaminant
Reduction NSF Reduction
Requirements Average
Influent Influent Challenge
Concentration Maximum
Effluent Average
Effluent Minimum %
Reduction Average %
Reduction NSF Test
Number
Lead: @ pH 6.5
Lead: @ pH 8.5 0.01mg/L
0.01mg/L 0.16 mg/L***
0.15 mg/L*** 0.15 mg/L ± 10%
0.15 mg/L ± 10% 0.001 mg/L
0.001 mg/L 0.001 mg/L
0.001 mg/L 99.35%
99.31% 99.35%
99.31% 507610-01
507611-01
Mercury: @ pH 6.5
Mercury: @ pH 8.5 0.003 mg/L
0.002 mg/L 0.0062 mg/L
0.0061 mg/L 0.006 mg/L ± 10%
0.006 mg/L ± 10% 0.0003 mg/L
0.0009 mg/L 0.00023 mg/L
0.00052 mg/L 95.2%
85.2% 96.8%
91.8% 507160-02
507161-02
Benzene 0.005 mg/L 0.014 mg/L 0.015 ± 10% 0.0005 mg/L 0.0005 mg/L 96.4% 96.4% 507169-02
p-dichlorobenzene 0.075 mg/L 0.219 mg/L 0.225 ± 10% 0.0005 mg/L 0.0005 mg/L 99.77% 99.77% 507172-02
Toxaphene 0.003 mg/L 0.014 mg/L 0.015 ± 10% 0.0012 mg/L 0.001 mg/L 91.43% 92.6% 507171-02
Carbofuran 0.04 mg/L 0.077 mg/L 0.080 ± 10% 0.031 mg/L 0.0064 mg/L 59.7 % 91.6% 507168-02
Substance Reduction
Aesthetic Effects NSF Reduction
Requirement Average
Influent Influent Challenge
Concentration Maximum
Effluent Average
Effluent Minimum %
Reduction Average %
Reduction NSF Test
Number
Chlorine Taste/Odor
Particulate Class II
*
≥
50%
≥
85%
2.0 mg/L
833,333/mL 2.0 mg/L ± 10%
At least 10,000
particles/ml 0.03 mg/L
100,000/mL** 0.02 mg/L
40,667/mL 98.5%
90.9% 99.0%
95.1% 504232-01
507163-02
Contaminant
Reduction NSF Reduction
Requirement Average
Influent Influent Challenge
Concentration Maximum
Effluent Average
Effluent Minimum %
Reduction Average %
Reduction NSF Test
Number
Lead: @ pH 6.5
Lead: @ pH 8.5 0.01mg/L
0.01mg/L 0.16 mg/L***
0.15 mg/L*** 0.15 mg/L ± 10%
0.15 mg/L ± 10% 0.001 mg/L
0.001 mg/L 0.001 mg/L
0.001 mg/L 99.35%
99.31% 99.35%
99.31% 507610-01
507611-01
Mercury: @ pH 6.5
Mercury: @ pH 8.5 0.003 mg/L
0.002 mg/L 0.0062 mg/L
0.0061 mg/L 0.006 mg/L ± 10%
0.006 mg/L ± 10% 0.0003 mg/L
0.0009 mg/L 0.00023 mg/L
0.00052 mg/L 95.2%
85.2% 96.22%
91.57% 507160-02
507161-02
Benzene 0.005 mg/L 0.014 0.015 ± 10% 0.005 mg/L 0.0005 96.4% 96.4% 507169-02
p-dichlorobenzene 0.075 mg/L 0.219 0.225 ± 10% 0.0005 mg/L 0.0005 99.77% 99.77% 507172-02
Toxaphene 0.003 mg/L 0.014 0.015 ± 10% 0.0012 mg/L 0.001 91.43% 92.86% 507171-02
Carbofuran 0.04 mg/L 0.0768 0.080 ± 10% 0.031 mg/L 0.0057 59.7 % 92.5% 507168-02
Tested and certified by NSF International against ANSI/NSF Standard
42 for the reduction of Chlorine, Taste and Odor, Particulate Class II*;
and against ANSI/NSF Standard 53 for the reduction of Lead,
Mercury, Benzene, Toxaphene, p-dichlorobenzene, and Carbofuran.
Application Guidelines/Water Supply Parameters
Water Supply
Water Pressure
Water Temperature
Service Flow Rate City or Well
30 - 120 psi (207 - 827 kPa)
33° - 100°F (0.6° - 37.8° C)
0.5 gpm (1.9 L/min.) @ 60 psi.
*
**
***
Class II particle size: >1 to <5
Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
® NSF is a registered trademark of NSF International.