26
GB
Programming cooking
A cooking mode must be selected before programming can take
place.
Programming the cooking duration
1. Press the
button several times until the
icon and the
three digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust the
duration.
3. Press the
button again to confirm;
4. When the set time has elapsed, the text END appears on the
DISPLAY, the oven will stop cooking and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed. The programme will stop automatically
at 10:15 a.m.
Setting the end time for a cooking mode
A cooking duration must be set before the cooking end time
can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the
button until the
icon and the two
digits on the DISPLAY begin to flash.
3. Turn the TIMER KNOB towards “+” and “-” to adjust the hour
value.
4. Press the
button again until the other two digits on the
DISPLAY begin to flash.
5. Turn the TIMER KNOB towards “+” and “-” to adjust the minute
value.
6. Press the
button again to confirm.
7. When the set time has elapsed, the text END appears on the
DISPLAY, the oven will stop cooking and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed, while the end time is set to 12:30. The
programme will start automatically at 11:15 a.m.
Programming has been set when the
and
buttons are
illuminated. The DISPLAY shows the cooking end time and the
cooking duration alternately.
To cancel programming, turn the SELECTOR knob to the “0”
position.
Practical cooking advice
Do not place racks in position 1 and 5 during fan-assisted
cooking. This is because excessive direct heat can burn
temperature sensitive foods.
In the SPIT ROAST and ROASTING cooking modes, place the
dripping pan in position 1 to collect cooking residues (fat and/or
grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires more
heat on 2.
• Place the dripping pan on the bottom and the rack on top.
PIZZA
• Use a light aluminium pizza pan. Place it on the rack provided.
For a crispy crust, do not use the dripping pan as it prevents the
crust from forming by extending the total cooking time.
• If the pizza has a lot of toppings, we recommend adding the
mozzarella cheese on top of the pizza halfway through the
cooking process.
WARNING! The oven is
provided with a stop sys-
tem to extract the racks
and prevent them from
coming out of the oven.(1)
As shown in the drawing,
to extract them comple-
tely, simply lift the racks,
holding them on the front
part, and pull (2).
To operate the spit roast function
see diagram) proceed as follows:
1. Place the dripping pan in
position 1.
2. Place the rotisserie
support in position 3 and
insert the spit in the hole
provided on the back panel
of the oven.
3. Start the spit roast function
by selecting the
symbols.
When this mode is enabled, the rotisserie spit will stop if the
door is opened.
Spit roast
Содержание AXMT 6533 /IX
Страница 1: ...AXMT 6533 IX ...
Страница 31: ...NL 31 ...
