background image

3

Programme selector knob

The drying programme is selected by 
turning this knob.

Programme sequence

“Start (Pause)” button

The drying programme is started by 
pressing this button. The indicator lamp 
flashes during the selection phase and 
lights up during drying.

Overdry

protection

Drying

Anti-

crease

End 

of cycle

+

Options

Anticrease

Selecting this option prevents laundry 
from creasing by extending the 
automatic anticrease up to 12 hrs. 
Cannot be selected together with 
“Buzzer” option.

Gentle

Reduces drying intensity (recommended 
for delicate items).

Rapid Cotton

Shortens drying duration. 
Recommended for thin items of same 
size.

Buzzer

Signals/sounds end of drying cycle. Led 
on: buzzer is selected.

Drum light

(Option only available when programme 
is selected).
Push the button to turn the drum light 
on for 30 sec. and push again to turn the 
drum light off.

Start delay

Delays the start of the drying cycle by 1 
to 12 hrs. Each time the button is 
pressed, the start time is delayed by 1 
hour. Then press the “Start (Pause)” 
button to confirm the final selection and 
to start the programme.
The delayed start indicator 

 flashes 

and the countdown is running.
The countdown is indicated in 1 hour 
intervals, and the last hour is indicated in 
1 minute steps.
During running countdown, you can 
reduce the selected time in 1 hour step 
by pressing the button.
Pressing the button during the last 59 
minutes of start delay will start the 
drying cycle.
During the countdown, the drum of the 
dryer will turn from time to time to 
redistribute the laundry. To cancel or 
change the previously set time delay, set 
the index of the programme selector 
knob to “Off” “

” or open the door.

Содержание AWZ 9678







Отзывы: