GB
AWZ 9678
Quick Reference Guide
Before using the machine, please also read the instructions for use carefully!
2
Indicator lamps
Filter
The indicator lamp lights up when the
filter and/or heat exchanger need
cleaning.
Clean the filter at the end of every
cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after
every drying cycle.
Clean heat exchanger
The Led lights up after 30 cycles when
the heat exchanger needs to be cleaned.
Clean the heat exchanger. Then for
reset the led indication, turn the
programme selector knob to the
vertical position indicated by the symbol
“
” and press the “Start (Pause)”
button during 3 seconds until led
switches off.
Service
If this red icon is on, your dryer needs
to be checked by the Whirlpool Service.
Time remaining display
Depending on the programme selected,
once the drying cycle has been started,
a default drying time is displayed. The
time displayed is corrected by a few
minutes depending on the volume, type
and dampness of the laundry.
The drying time specified is a
calculated value which will be
updated during the drying
programme.
The flashing lines indicate that the
calculation is running. The remaining
time will be updated.
End
The drying programme is finished.
Please unload the dryer.
Overdry protection
The indicator lights up when a humidity
controlled programme is selected, to
indicate the working protection
function. The flashing symbol indicates
the update of the remaining time
indication.
Dryness level
This is an option to adjust the dryness of
the laundry according to your wishes.
Select the desired programme and the
option dryness level adjustment by
pressing the button.
Pressing 1 time the button, you select
more dry level or
Pressing 2 times the button, you select
less dry level or
Pressing 3 times the button, you select
again normal dry level.
