Whirlpool ASH09000R Скачать руководство пользователя страница 34

Страница: 34 / 96

1. Must follow the electric safety regulations when installing the unit.

2. According to the local safety regulations, use qualified power supply circuit and air switch.

3. Make sure the power supply matches with the requirement of air conditioner.

Unstable power supply or incorrect wiring or malfunction. Please install proper

power supply cables before using the air conditioner.

4. Properly connect the live wire, neutral wire and grounding wire of power socket.

5. Be sure to cut off the power supply before proceeding any work related to

electricity and safety.

6. Do not put through the power before finishing installation.

7. If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons in order to avoid a hazard.

8. The temperature of refrigerant circuit will be high, please keep the interconnection

cable away from the copper tube.

9. The appliance shall be installed in accordance with national wiring regulations.

1. The air conditioner is the first class electric appliance. It must be properly

grounding with specialized grounding device by a professional. Please make sure

it is always grounded effectively, otherwise it may cause electric shock.

2. The yellow-green wire in air conditioner is grounding wire, which can't be used for

other purposes.

3. The grounding resistance should comply with national electric safety regulations.

4. The appliance must be positioned so that the plug is accessible.

5. An all-pole disconnection switch having a contact separation of at least 3mm in all

poles should be connected in fixed wiring. For models with a power plug, make

sure the plug is within reach after installation.

6. Including an air switch with suitable capacity, please note the following table.

Air switch should be included magnet buckle and heating buckle function, it can

protect the circuit-short and overload. (Caution: please do not use the fuse only

for protect the circuit)

Safety precaution

Grounding requirement

Requirements for electric connection

ASV09000R
ASV12000R
ASV18000R
ASV22000R
ASH09000R
ASH12000R
ASH18000R
ASH22000R

10A
13A
16A
25A
10A
13A
16A
25A

Type

Model

Split On/Off

Required Capacity of

air break switch

Содержание ASH09000R

































































































Результаты поиска

Содержание ASH09000R

Отзывы:

Похожие инструкции для ASH09000R

Бренды по названию

Популярные бренды

Whirlpool ASH09000R, Руководство по установке

Результаты поиска

Содержание ASH09000R

Отзывы:

Похожие инструкции для ASH09000R

Бренды по названию

Популярные бренды