6
CLOCK
Keep the door open
while setting the
Clock. This gives you 10 minutes to
complete the setting of the Clock.
Otherwise, each step must be
accomplished within 60 seconds.
1(a). Turn the multifunction knob to the zero
position.
2(b). Press the Select button (3 seconds)
until the left-hand digit (hour’s) flicker.
3. Turn the +/- knob to set the hours.
4. Press the Select button again. (The two
right hand digits (minutes) flicker).
5. Turn the +/- knob to set the minutes.
6. Press the Select button again.
The Clock is set and in operation.
Note:
When the appliance is first plugged
in or after a power failure, the display is
blank. If the clock is not set, the display will
remain blank until the cooking time is set.
START PROTECTION / CHILD LOCK
This automatic safety function is
activated one minute after
the oven has
returned to “stand by mode“.
PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, turn
or stir the food by opening the door. The
setting will be maintained for 10 minutes.
To continue cooking:
Close the door and press the Start
button
ONCE. The cooking is
resumed from where it was paused.
Pressing the Start button
TWICE will
increase the time by 30 seconds.
If you don’t want to continue
cooking:
Remove the food, close the door
and press the STOP button
A beep will signal
once a minute
for 10 minutes when the cooking is
finished. Press the STOP button or open
the door to cancel the signal.
Note:
The oven will only hold the settings
for 60 seconds if the door is opened and
then closed after the cooking is finished.
The door must be opened and closed
e.g.
putting food into it, before the safety lock is
released. Else the display will show
“door“
.
1(a)
3
5
2
4
If you wish to remove the clock
from the
display once it has been set,
follow steps (a) & (b) and press the Stop
button (c).
(c)
To reinstate the clock,
follow the above
procedure.
6
(b)
Содержание AMW 540
Страница 3: ...1 Instructions for use AMW 540 ...
