2
INSTALLATION
PRIOR TO CONNECTING
Check that the voltage
on the rating plate
corresponds to the voltage
in your home
.
AFTER CONNECTING
Do not remove the microwave inlet
protection plates
located on the side of the
oven cavity wall. They prevent grease &
food particles from entering the microwave
inlet channels.
Ensure that the appliance is not
damaged.
Check that the oven door closes
firmly against the door support and that the
internal door seal is not damaged. Empty
the oven and clean the interior with a soft,
damp cloth.
Important!
A permanent connection requires
the
installation of a separating device. The
separating device must have an omnipolar
contact opening of more than 3 mm
including LS switches, safety valves and
relays. The separating device must be
connected directly to the terminal.
The manufacturers are not liable for any
problems caused by the user’s failure to
observe these instructions.
The earthing of this appliance
is
compulsory. The manufacturer will accept
no responsibility for injury to persons,
animals or damage to objects arising from
the non-observance of this requirement.
In the case of a permanent connection,
the appliance should be installed by a
qualified technician.
Ensure
the oven cavity is empty before
mounting.
Do not operate this appliance
if it has a
damaged mains cord or plug, if it is not
working properly, or if it has been damaged
or dropped. Do not immerse the mains
cord or plug in water. Keep the cord away
from hot surfaces. Electrical shock, fire or
other hazards may result.
Follow the supplied
separate mounting
instructions when installing the appliance.
The oven can be operated only
if the oven
door is firmly closed.
Содержание AMW 540
Страница 3: ...1 Instructions for use AMW 540 ...
