background image

To get the best performance from the 
hood, please read these user 
instructions carefully.

Packaging materials must be kept out 
ofchildren’s reach as they are potentially 
dangerous. Keep the packaging material 
(plastic bags, polystyrene, etc.) well out of 
their reach.

Make sure the hood has not been damaged 
during transportation.

Installation and connection to the mains and 
exhaust ducts must be carried out by a 
qualified technician, in accordance with the 
manufacturer's instructions and local 
safety regulations.

1. Packaging

The packaging is marked with the recycling 
symbol, signifying that it can be 100% 
recycled 

. Dispose of the packaging in 

conformity with environmental regulations. 
Packaging materials must be kept out 
ofchildren’s reach as they are potentially 
dangerous. Keep the packaging material 
(plastic bags, polystyrene, etc.) well out of 
their reach.

2. Appliance

The appliance is made from recyclable 
materials and must be scrapped in accordance 
with local waste disposal regulations.
Make the appliance inoperable by 
unplugging it and cutting off the power cable. 
Follow local waste disposal regulations 
when scrapping.

1. Always disconnect the hood by switching 

off the electrical power supply before 
cleaning or carrying out maintenance.

2. Exhaust air must not be conveyed through 

the same flue used by the heating system or 
other non-electrical appliances.

3. Do not flambé food under the hood since 

the flames generated could cause 
a fire.

4. Never leave the pan unattended when 

frying as the cooking oil could ignite.

5. Regular maintenance guarantees smooth 

hood operation and high performance.

6. If the hood is used together with 

non-electrically powered appliances, 
ambient negative pressure must not exceed 
4 pa (4 x 10

-5

bar).

For this reason, make sure the room is 
well ventilated.

7. Regularly remove dirt deposits. 

Regularly clean or replace filters. 
Never use flammable materials to convey 
exhaust air.

Declaration of conformity
This appliance has been designed, built and 
marketed in compliance with:
-

the safety requirements of the “Low Voltage” 
EEC Directive 73/23;

-

the protection requirements of the “EMC” 
EEC Directive 89/336 amended by 
EEC Directive 93/68.

BEFORE USING THE HOOD

PROTECTING THE ENVIRONMENT

GENERAL TIPS AND SUGGESTIONS

75004Agb.fm5  Page 8  Tuesday, March 27, 2001  10:55 AM

Содержание AKR610WH

Страница 1: ... carefully BEFORE USING THE HOOD PAGE 8 PROTECTING THE ENVIRONMENT PAGE 8 GENERAL TIPS AND SUGGESTIONS PAGE 8 HOW TO USE THE HOOD PAGE 9 CARE AND MAINTENANCE PAGE 9 TROUBLESHOOTING GUIDE PAGE 9 AFTER SALES SERVICE PAGE 10 INSTALLATION PAGE 10 75004Agb fm5 Page 7 Tuesday March 27 2001 10 55 AM ...

Страница 2: ...tting off the power cable Follow local waste disposal regulations when scrapping 1 Always disconnect the hood by switching off the electrical power supply before cleaning or carrying out maintenance 2 Exhaust air must not be conveyed through the same flue used by the heating system or other non electrical appliances 3 Do not flambé food under the hood since the flames generated could cause a fire ...

Страница 3: ...gents Leave filter to dry handling it carefully before remounting it Whenever cleaning or replacing the grease filters clean all other exposed parts of the hood Carbon filter Air recirculation mode see following page The carbon filter cannot be washed or regenerated Replace the carbon filter normal usage every 6 months Rectangular carbon filter every 4 months Circular carbon filter Replacing the b...

Страница 4: ... outlet and collar 2 Some models are fitted with a plastic deflector that closes off the rear outlet If fitted remove it 3 Fit the collar in the rear outlet 4 Put the cover if fitted in the upper outlet Warning If the hood has a carbon filter this should be removed Check that the switch inside the hood if fitted is in position A Extractor if not set it to this position AIR CIRCULATION MODE F see a...

Отзывы: