GB7
1.
Control panel.
2.
Grease filters.
3.
Halogen lamps.
4.
Telescopic flue.
DESCRIPTION AND USE OF HOOD
Control panel
1.
OFF / Extraction speed (power) decrease button
2.
ON / Extraction speed (power) increase button
Note:
The intensive extraction speed (power) is timed and lasts for 5 minutes
(indicator
c
flashes); the hood then reverts to extraction speed (power) 2.
3.
Timer ON/OFF button:
delays deactivation of the selected extraction speed (power) by 5 minutes.
Note:
The button also has the
"Reset filter saturation signaling"
function
4.
Light ON/OFF button
5.
Display, shows:
a. Extraction speed (power):
the indicator rotates according to the selected extraction speed (power).
Safety operation:
the indicator flashes.
b. Grease filter saturation:
comes on when filter maintenance is required.
c. Timer
d. Active carbon filter saturation:
comes on when filter maintenance is required.
Note:
This function is normally disabled and should only be activated if the hood is used as a filter version (with carbon filter fitted).
To do so, proceed as follows:
- switch off the hood
- keep the
buttons 1
and
3
pressed at the same time until the indicator goes from flashing (indicator disabled) to fixed light (indicator enabled).
- release the buttons.
To deactivate it, repeat the procedure: the indicator will go from fixed light (indicator enabled) to flashing (indicator disabled).
e. Lighting
Safety operation
The hood has a sensor which, in case of a sudden increase in temperature, activates extraction until the temperature drops significantly.
Filter saturation signaling reset
After carrying out filter maintenance, keep the
button 3
pressed until the indicator goes off.
Содержание AKR 757
