Whirlpool AKR 010, Руководство пользователя

Страница: 18 / 19

N C
M Y
INSTALLATION
ELECTRICAL PART
IMPORTANT: Install the cooktop following the
manufacturer’s instructions.
Incorrect installation can cause damage to people,
animals or things, for which the manufacturer
cannot be held responsible.
− The appliance must be connected to the mains by a
competent electrician and according to the
regulations in force.
− The appliance must be connected to the mains,
checking first of all that the voltage corresponds to
the value given on the rating plate and that the
section of the electrical cables can take the load
indicated on the rating plate.
− Fit a standard plug which is suitable for the power
absorbed by the appliance.
− The plug must be put into a socket connected to
the earth system in compliance with safety rules.
− For the United Kingdom:
As the colours of the wire of the supply cable of
this appliance may not correspond with the colours
which identify the terminals of your plug, proceed as
follows:
- the yellow/green wire must be connected to the
plug terminal marked with the letter E or with the
earth symbol or coloured green or yellow/green;
- the blue wire must be connected to the terminal
marked with the letter N or coloured black;
- the brown wire must be connected to the
terminal marked with the letter L or coloured red;
− The connection can be made directly to the mains
by putting an all-pole switch with minimum opening
between the contacts of 3mm between the
appliance and the mains.
− The supply cable must not touch hot parts and must
be so positioned that it does not exceed the
temperature of 75
o
C at any point.
− When the appliance is installed the switch or socket
must always be accessible.
− The appliance must have its own supply; any other
appliances installed near it must be supplied
separately.
N.B. For connection to the mains do not use adapters,
reductions or shunts because these can cause
overheating or burning.
If the installation requires modifications to the domestic
electrical system or if the socket and the appliance plug
are not compatible, contact a professional electrician.
He must, in particular, also make sure that the section
of the socket cables is suitable for the power absorbed
by the appliance.
The appliance must be connected to the earth.
The manufacturer declines all responsibility for
any problem caused by failure to observe this
instruction.
39
39