14 | EN
4
Preparation
Tips for saving energy
The following information will help you
to use your appliance in an ecological
way, and to save energy:
•
Use dark coloured or enamel
coated cookware in the oven since
the heat transmission will be better.
•
While cooking your dishes, perform
a preheating operation if it is
advised in the user manual or
cooking instructions.
•
Do not open the door of the oven
frequently during cooking.
•
Try to cook more than one dish in
the oven at the same time
whenever possible. You can cook
by placing two cooking vessels
onto the wire shelf.
•
Cook more than one dish one after
another. The oven will already be
hot.
•
You can save energy by switching
off your oven a few minutes before
the end of the cooking time. Do not
open the oven door.
•
Defrost frozen dishes before
cooking them.
•
Use pots/pans with cover for
cooking. If there is no cover,
energy consumption may increase
4 times.
•
Select the burner which is suitable
for the bottom size of the pot to be
used. Always select the correct pot
size for your dishes. Larger pots
require more energy.
•
Pay attention to use flat bottom
pots when cooking with electric
hobs.
Pots with thick bottom will provide
a better heat conduction. You can
obtain energy savings up to 1/3.
•
Vessels and pots must be
compatible with the hotplates.
Bottom of the vessels or pots must
not be smaller than the hotplate.
•
Keep the hotplates and bottom of
the pots clean. Dirt will decrease
the heat conduction between the
hotplate and bottom of the pot.
•
For long cookings, turn off the
hotplate 5 or 10 minutes before the
end of cooking time. You can
obtain energy savings up to 20%
by using the residual heat.
Initial use
First cleaning of the appliance
NOTICE
The surface may get damaged by
some detergents or cleaning
materials.
Do not use aggressive detergents,
cleaning powder/cream or any
sharp objects.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance
with a damp cloth or sponge and
dry with a cloth.
Initial heating
Heat up the product for about 30
minutes and then switch it off. Thus,
any production residues or layers will
be burnt off and removed.
Содержание ACM220
Страница 1: ...ACM220 ...
Страница 118: ...5019 310 66156 02 12 ...