9
•
If the appliance is left empty for a long time, switch it off, defrost, clean, dry and leave
the door open to prevent mold from forming inside the appliance.
•
Strictly adhere to the expiration date for foods as stated by the manufacturer on the
product packaging.
DEFROSTING, CLEANING AND CARE
The freezer compartment should be thawed not less than twice a year or when a layer of
ice thicker than 5 mm forms in it. Do the actions below in the order they are listed:
WARN ING! Turn the appliance off and pull the plug out of the electrical
socket.
•
Remove food from the freezer compartment. The frozen
foodstuffs will not warm up too much while you are thawing the
freezer compartment if you cover them with a thick cloth and
keep them in a cool place
.
•
Pull out the melt water gutter, turn it 180° and hook it up. After
thawing, place the container with the water gutter.
•
Leave the freezer door open. After the frost has thawed, dry the
inside of the freezer and the accessories dry.
•
Remove the melt water gutter, turn it 180
o
again and replace it.
•
Close the freezer door and turn on.
REGULARLY CLEAN THE APPLIANCE.
Note: before cleaning the cooling device and its rear compartment part,
the device must be disconnected from the mains by unplugging.
•
Protect the appliance inner surfaces and plastic parts from fats, acids and sauces. In
case of accidental spills
–
immediately clean with warm soapy water or dishwashing
detergent. Wipe dry.
•
Regularly clean the hermetic gaskets of the doors. Wipe dry.
•
At least once a year clean dust away from the back part of the appliance body and the
compressor. A soft brush, electrostatic cloth or vacuum cleaner may be used for
cleaning.
•
DO NOT use detergents containing abrasive particles, acid, alcohol or benzene for
cleaning the appliance inner and outer surfaces. DO NOT use for cleaning cloths or
sponges that have coarse surfaces intended for scrubbing.
•
DO NOT use any chemicals to defrost ice or frost.
•
If the appliance is to be left switched off for an extended period, leave its doors open.
CHANGING THE OPENING DIRECTION OF THE DOORS
See fig. 5, page 2
It is recommended that changing the opening direction of the doors should be done with a
helper. You will need two spanners No. 8 and No. 10 and a head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the freezer
horizontally!
Warning:
Always disconnect the unit from the mains before any maintenance or repair
work is carried out.
Содержание 859991637630
Страница 2: ...1 4 ...
Страница 3: ...2 ...