manualshive.com logo in svg
background image

GB 9

Using chlorine bleach

•   Wash your laundry in the desired programme

  (Cotton, Synthetics), adding an appropriate

  amount of chlorine bleach to the SOFTENER

  chamber (close the lid carefully).

•   Immediately after end of programme, start the

  “Rinse and Spin” programme to eliminate any

  residual bleach smell; if you want, you can add

  softener.

•   Never put both chlorine bleach and softener into

  the softener chamber at the same time. 

The washing machine is provided with a self-cleaning

pump. The filter keeps objects like buttons, coins, safetypins

etc. which have been left in the laundry.
We recommend to check and clean the filter regularly, at

least two or three times a year.
Especially:

•  if the appliance is not draining properly or if it fails to

  perform spin cycles.

•  if the “Clean pump” indication lights up.

  IMPORTANT: make sure the water has cooled before

  draining the appliance.
Residual water must be drained also before transporting

the machine.
1.   Unplug the washing machine.
2.   Open the filter cover with a coin.
3.   Place a bowl beneath it.
4.   Turn the filter slowly anti-clockwise until the grip is

 

vertical; do not remove it as yet.

5.   Wait until all the water has drained out.
6.   Now unscrew the filter completely and extract it.
7.   Clean the filter and the filter chamber.
8.   Make sure the pump impeller (in the housing behind

 

the filter) is not obstructed.

9.   Insert the filter again and screw it fully down in a

 

clockwise direction to the stop (until the grip is

 

horizontal).

10.  Pour approximately one litre of water into the washing

 

machine via the drum and check that water does not

 

leak from the filter.

11.  Close the filter cover.
12.  Reconnect the washing machine.

CLEANING THE FILTER/

DRAINING RESIDUAL WATER

Using starch powder

If you want to use starch powder, proceed as follows:
•   Wash your laundry in the desired wash programme.

•   Prepare the starch solution according to the

  starch manufacturer’s instructions.

•   Fill the prepared starch solution (maximum

  100 ml) into the softener chamber of the

  detergent dispenser.

•   Close the lid and start programme “Rinse and  

  Spin”.

2

6

Содержание 6760
















Отзывы: