background image

11

Load is wrinkled

Did you unload the washer promptly?
Unload the washer as soon as it stops.

Did you use the right cycle for the load being washed?
Use the Synthetics/Permanent Press cycle or another cycle 
with low spin speeds (if available) to reduce wrinkling.

Did you overload the washer?
The wash load must be balanced and not overloaded. Loads 
should move freely during washing.

Was the wash water warm enough to relax wrinkles, or 
are you using warm rinses?
Use hot or warm washes if safe for the load. Use cold rinse 
water.

Are the hot and cold water hoses reversed? 
Check to be sure the hot and cold water hoses are connected 
to the right faucets. See the Installation Instructions.

Load is tangled or twisted

Did you overload the washer?
The wash load must be balanced and not overloaded. Loads 
should move freely during washing.

Did you wrap items around the agitator?
Drop items loosely into the washer. Do not wrap items around 
the agitator.

Gray whites, dingy colors

Did you properly sort the load?
Dye transfer can occur when mixing whites and colors in a 
load. Sort dark clothes from whites and lights.

Was the wash temperature too low?
Use hot or warm washes if safe for the load. Make sure your 
hot water system is adequate to provide a hot water wash.

Did you use enough detergent, or do you have hard 
water?
Use more detergent for washing heavy soils in cold or hard 
water.

Are the hot and cold water hoses reversed? 
Check to be sure the hot and cold water hoses are connected 
to the right faucets. See the Installation Instructions.

Garment damage

Check the following:
Were sharp items removed from pockets before washing? 
Empty pockets, zip zippers, snap or hook fasteners before 
washing.

Were strings and sashes tied to prevent tangling?

Were items damaged before washing? Mend rips and broken 
threads in seams before washing.

Did you overload the washer?
The wash load must be balanced and not overloaded. Loads 
should move freely during washing.

Did you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Wipe up bleach 
spills. Undiluted bleach will damage fabrics.

Did you follow the manufacturer’s care label instructions?

Содержание 3RGSC9400













Отзывы: