WHILL C2 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 114

background image

91

WHILL Model C2/Ci2 User Manual

6

6. Storage and transport methods

6.2. Transport

Pay attention to the following when transporting this device.
•  When carrying the device by hand, grab the designated handles and do not hold it by any other part.
•  When using public transportation, follow the rules of the public transportation agency.
•  The unoccupied device is suitable for land and air transport.

WARNING

Do not hoist the device when there is a person on the device. Always disassemble the device
before lifting it. Be careful of the weight when lifting each component. Do not lift the component
by holding the battery handle while the battery is inserted.

There is a risk of injury to the user and damage to the device.

Do not use the device as a seat in an automobile or other vehicle.

There is a risk of damage to the device, causing an accident.
The symbol on the right indicates that the device is not intended to be
used as a seat in a motor vehicle.

Do not attempt to maneuver the device onto an incline if the anti-tip bar touches the ground on
the incline. When the anti-tip bar touches the ground it means that the incline is too steep for
the device.

Maneuvering the device when the anti-tip bar is in contact with the ground or if the incline is
extremely dangerous will cause the device to lose control.

CAUTION

When transporting the device or its components in an automobile trunk or other vehicles, make
sure that each component is safely secured.

There is a risk of damage to the device.

When using a wheelchair lift for vehicles, be sure to fasten the device securely.

There is a risk of the device falling, causing damage to the device.

• The device has not been tested against the limits specified in the Technical Specification for Interoperability

relating to Accessibility for Persons with Reduced Mobility (PRM-TSI).

• Should you travel with your device on a commercial aircraft, contact the airline in advance for confirmation of

the boarding procedure. You may be asked by the airline to provide the specifications of the device. Information
on the device relevant to air travel is available for download from the FAQ section on the WHILL website.
Please note that some airlines may refuse to transport your device.

«
...
90
91
92
93
94
...
»

Содержание C2



















































































































Отзывы:

Нет отзывов

Похожие инструкции для C2

Бренд: Razor Страницы: 8

Бренд: Gotrax Страницы: 20

Бренд: DAELIM Страницы: 66

Бренд: Jetson Страницы: 22

Бренд: Blunt/Envy Scooters Страницы: 21

Бренд: Blunt/Envy Scooters Страницы: 32

Бренд: F4H NAVBOARD Страницы: 26

Бренд: PEUGEOT Страницы: 1

Бренд: PEUGEOT Страницы: 1

Бренд: PEUGEOT Страницы: 6

Бренд: PEUGEOT Страницы: 28

Бренд: PEUGEOT Страницы: 22

Бренд: PEUGEOT Страницы: 36

Бренд: PEUGEOT Страницы: 43

Бренд: Trikke Страницы: 12

Бренд: KB Страницы: 14

Бренд: Costway Страницы: 3

Бренд: Gavin Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды