WHILL C2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 114

background image

15

WHILL Model C2/Ci2 User Manual

1

1. Safety precautions

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must
be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.

ISED Information

This Class B device complies with Canadian ICES-3 (B). This device contains licence-exempt transmitters/
receivers that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device
must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-3 (B) du Canada. L’émetteur/récepteur
exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the ISED radio frequency exposure limits. The Wireless
Device should be used in such a manner such that the potential for human contact during normal operation is
minimized.

This device has been evaluated for and shown compliant with the ISED Canada RF Exposure limits under mobile
exposure conditions (antennas are greater than 20 cm from a person’s body).

Informations concernant l’exposition aux fréquences radio (RF)

La puissance de sortie émise par l’appareil sans fil est inférieure à la limite d’exposition aux fréquences radio d’ISDE
Canada. Utilisez l’appareil sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.

Ce dispositif a été évalué et démontré conforme aux limites d’exposition aux RF d’ISDE Canada dans des conditions
d’exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d’une personne).

«
...
14
15
16
17
18
...
»

Содержание C2



















































































































Отзывы:

Нет отзывов

Похожие инструкции для C2

Бренд: Razor Страницы: 8

Бренд: Suzuki Страницы: 258

Бренд: Daymak Страницы: 32

Бренд: Motus Страницы: 20

Бренд: Razor Страницы: 16

Бренд: Razor Страницы: 20

Бренд: Urban Страницы: 14

Бренд: Kinroad Страницы: 34

Бренд: FREERIDER Страницы: 44

Бренд: Rider Страницы: 10

Бренд: General Moped Company Страницы: 25

Бренд: VOI Страницы: 11

Бренд: Land Pride Страницы: 44

Бренд: FD Motors Страницы: 26

Бренд: Force Moov Страницы: 67

Бренд: KneeRover Страницы: 4

Бренд: Razor Страницы: 7

Power Core S150

Бренд: Razor Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды