WFT 1D-A 703-020, Руководство пользователя, Страница: 38 / 48

14
MAX
2
MIN
3
SPEED DIAL
minus
-
SPEED DIAL
+
plus
1
AUTO STOP JIGGING
SURFACE
RANGE/BOTTOM
OFF
Automatic winding with electric power and how to change speed :
1. To switch on the motor you have to push “JIGGING“ switch once (1) .
Now you can regulate the speed by the speed lever,
or practice jigging with the “JIGGING“ switch.
2.
To increase the speed, push the speed lever to direction MAX
(2)
.
To decrease the speed, pull the speed lever to the MIN direction.
In end position at the OFF mark
(3)
the motor stops.
With SPEED LEVER and SPEED DIAL :
Starting the motor :
Push speed lever from OFF position foreward to the MAX direction.
Alternatively you can turn the SPEED DIAL foreward to + .
Decreasing winding up speed :
To decrease the speed, pull the speed lever to the MIN direction. .
Alternatively you can turn the SPEED DIAL backwards to - .
When the speed lever has reached the OFF position, the motor stops.
In the folowing cases the motor stops automatically,
respectively can´t be activated by pushing “JIGGING“ button :
(a) if the line actually is spooled up to the saved “water surface 0“ position.
(b) if the line actually is spooled up to the saved “sides of boat“ position.
(c) in case none of those positions is saved,
the motor stops 5 meter before the end of line
and also can´t be activated with
the “ON/OFF/JIGGING“.
The rest of the fishing line must be spooled up manually with the handle.
Please note :
- It is not possible to start the motor for haul in
if less than 10 meter line is off the spool.
- At every speed you can regulate
with the SPEED LEVER and also with the SPEED DIAL.
Operating methods