WFT 1D-A 703-020, Руководство пользователя, Страница: 37 / 48

ANGELN MIT DER WFT ELECTRA
13
Following errors could occure by winding up fishing line :
The “sides of boat“ automatic stop and the “surface of water 0“ automatic stop position :
If the bait was descended more than 10 m, the reel wil beep while winding up line,
to signalize that the bait is nearer to the surface.
1.
5 m before reaching the water surface and at the next 3 following meters, you will hear a short acoustic signal (beep).
When the “surface of water 0“ position is reached, there sounds a longer signal and the motor stops.
2. At the following manually upwinding the aproaching of the “sides of boat“ position is signed by signals on each meter.
A long signal indicates that the “sides of boat“ position is reached.
Operating methods
Error in the control box.
- Restart from the beginning.
Short of line.
- Check the drag position.
Error of spool´s rotation.
- Reset after checking.
Acoustic signals are only active if
(a) - the “sides of boat“ point AND the “surface of water 0“ point has been saved.
(b) - the bait is descended more than 10 m.
- If you do not safe a “Surface Of Water“ position, the motor stops automatically at reaching 5 meter rest of line.
- If you only save the “Sides Of Boat“ position and no “Surface Of Water“ position,
the motor stops automatically at reaching the “Sides Of Boat“ position.
- If you have saved “Surface Of Water“ position,
the motor stops automatically at this position and the rest of line up to the reach of “Sides Of Boat“ position
has to be winded up manually with the power handle or by permanent pushing the “JIGGING“ switch.