WFT 1D-A 703-020, Руководство пользователя, Страница: 35 / 48

11
(5)
(6)
P
FISHING LINE DATA INPUT
1. Connect the reel to the power supply.
The display now shows like (1) and the reel gives an acoustic signal.
2. Push the “AUTO STOP“ switch and the “Range/Bottom“ switch coincidently for 3 seconds.
It displays like picture (2) .
3. Now push the “Auto Stop“-switch 5 times, since the display shows 000.0 (3) .
4. Choose with the “JIGGING“-switch programm No -4- for 480 Meter WFT 32KG Strong -line (4) ,
or select programm No -5- for 360 Meter WFT 39KG Strong -line.
Now wind up the line with the electric motor power,
by pushing forward the speed lever (5) .
5. Stop the motor 15 meters before it reached the 480 Meter WFT 32KG Strong.
Now wind up the rest of line manually with the powerhandle.
Than push the “Range/Bottom“-switch to save the spooled length of line (6).
Charge the spool with line and save the line data :
Connect the fishing line to the spool and synchronize with the line guide.
(Please, take note for the advices abaout the line guide at the end of this manual !)
Give the line a preload of 1,0 ~ 1,5 kg by using the star brake.
NOTE : - If inadvertently the “Range/Bottom“ switch is pushed while winding up the line,
all line datas will be lost, so you have to repeat the procedure.
- According to strain of line and / or expansion, error of indication about 5% are possible.
“Range/BOTTOM“-switch
is pushed,
initialization is displayed
The line datas are
saved now.
Display at
motor stop
Display after winded
up the last 15 meter