Wfly WFT07 Скачать руководство пользователя страница 35

Страница: 35 / 37

3 1

Ele-Aileron Mixing

●

Function

This feature is to allow elevator to work in the

aileron mixing function.

Notes:

Ele--aileron mixing, V-tail , Ele- flaps can not be

"warning", please forbid the other mixing functions,

opened simultaneously, if the screen displays

then turn on this function.

●

Settings

Into the "Preferences settings" under "Advanced

item.

Settings" menu .use Up / Down keys to select "Ele

2. Selected the options, press the + / - key to edit the

- aileron mixing", press OK key to enter the

data. Long press OK key to restore the default

function interface . As above.

values.

The steo of settings is as follows:

4. Set successfully, press EXIT key to return.

1. Using the up / down keys to choose the edit

V-Tail Mixing

●

Function

●

Settings

This feature is use for V-tail aircraft the elevator

and rudder mixing function.

Into the "Preferences Settings" under "Advanced

down keys to choose the edit item.

Settings" menu.use Up / Down keys to select "V-

2. Selected the options, press the + / - key to edit the

tail mixing" and press OK key to enter the function

data. Long press OK key to restore the default

interface. As above.

values.

The step of settings is as follows:1. Using the up /

3. Set successfully, press EXIT key to return.

INSTRUCTION MANUAL

WFT07 REMOTE CONTROL DEVICE

Airplane Function

Содержание WFT07






































Результаты поиска

Содержание WFT07

Отзывы:

Бренды по названию

Популярные бренды

Wfly WFT07, Инструкция по эксплуатации

Результаты поиска

Содержание WFT07

Отзывы:

Бренды по названию

Популярные бренды