manualshive.com logo in svg

Wfly WFT07, Инструкция по эксплуатации

Поделиться
Скачать
Wfly WFT07 Скачать руководство пользователя страница 24

2 0

●

Settings

In the "Preferences" interface,use Up / Down keys 

choose individual settings on one or setting on both 

to select the "throttle curve settings", press OK 

sides ), Press the + / - keys to set the values,long 

key to confirm enter the function interface, as 

press the OK key to return to the default value.

above. 

3. Use left and right arrow keys to select curve 

The steps of settings is as follows:

points, + / - keys to change the value of curve points.

1. Flight status (normal or stunt). Use the arrow 

4. Set successful, you can press EXIT key to return.

keys to enter edit state, you use + / - keys to select 
one of the curve, then enter the following settings.
2. Set the D / R, Use the arrow keys to select the 
"D / R"in the screen, when the screen light off, 
then enter the edit state of this function(you can 

8.Pitch Curve Settings

Curve picture

Flight Mode

Dual rate

Exponentia

 Curve point 

●

Function

●

Settings

Pitch  curve  with  the  throttle  stick  position  can 

curve is based on hovering, as a certain engine rpm 

adjusted  the  engine  rpm  flight  in  the  best  state, 

to  adjust  the  pitch  to  the  best  place  .  Stunt  pitch 

This pitch curve can be set normal, stunt and lock 

curve is maintaining a certain engine rpm, make the 

curve and so on. The operation of those curve can 

pitch with the throttle to complete stunts in  flying.

carried  out  by  the  switch.Pitch  curve  of  normal 

Pitch  curve  with  the  throttle  stick  position  can 

curve is based on hovering, as a certain engine rpm 

adjusted  the  engine  rpm  flight  in  the  best  state, 

to  adjust  the  pitch  to  the  best  place  .  Stunt  pitch 

This pitch curve can be set normal, stunt and lock 

curve is maintaining a certain engine rpm, make the 

curve and so on. The operation of those curve can 

pitch with the throttle to complete stunts in  flying.

carried  out  by  the  switch.Pitch  curve  of  normal 

9.Throttle Cut Settings

●

Function

Throttle cut settings function is to make the 

when implement the action. So when moving the 

engine off when the flight finished. Switch K1 is for 

throttle trim,have to check the throttle closed action 

opening and closing the throttle. Throttle trim 

position .

adjustment will affect the throttle closed position 

Settings and Notes

:

When the throttle closed 

the throttle turn off the function of the best range of 

switch move to open, can adjust the value until the 

motion is to set near the engine speed .

carburetor valve fully closed (engine shutdown). 
To prevent the error in the adjustment operation, 

Warning

:

●

Settings

In the "Preferences" interface,use Up / Down keys 

a + / - key to implement.3.Under the throttle cut 

to select the "throttle cut settings", press OK key 

condition, the rate of value and trim amount can 

to confirm enter the function interface, as above. 

settings with + / - key to the implement (adjustable 

The steps of settings is as follows:

range of ± 45%).4. Set successfully, press EXIT key 

1, the first to use the arrow keys to select Edit 

to return.

Item2. Throttle cut settings function on or off with 

Helicopter Functions

INSTRUCTION MANUAL 

WFT07 REMOTE CONTROL DEVICE

Содержание WFT07






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды