manualshive.com logo in svg

Wfly WFT07, Инструкция по эксплуатации

Поделиться
Скачать
Wfly WFT07 Скачать руководство пользователя страница 18

1 4

●

Settings

Press the MENU key to boot into the "System 

1, first to use the up / down arrow keys to edit the 

Settings" menu,use Up / Down arrow keys to 

selected item.

select the "trainer / Simulator", press OK key to 

2. Press OK button to confirm, then press the right 

enter the function interfacet, as shown above. 

arrow keys to determine. Reboot to take effect.

The steps of setting is as follows:

4.Control Stick Settings

●

Function

●

Settings

Control stick settings function allows users 

 Totally have four models to choose .

to freely setting the higher of the stick according 
to personal preferences . As shown. This machine       

Press the MENU key to boot into the "System 

1. First to use the arrow keys to select the edited 

Settings" menu,use Up / Down keys

item .

to select the "stick settings" and press OK key to 

2 Use Up / Down key to implementation Stick Mode . 

enter this function interface, as shown above 

3. Set successfully, press EXIT key to exit. 

The steps of settings is as follows: 

5.

Stick Calibration

Joystick calibration function allows users to 

Medium , it means push the stick to the middle 

change the throttle side according to personal 

position, Press OK and the stick on this position will 

preferences .

be set to 0%

。

 HIGH means you push the aileron/Rudder stick to 

Low, it means push the Aileron/Rudder stick to 

rightmost position or push the Elevator/Throttle 

leftmost position or put the Elevator/Throttle stick to 

stick to the top position. Press OK  and the stick 

lowest position. Press OK  and the stick on this 

on this position will be set to +100%. 

position will be set to -100%.

●

Function

●

Settings

Press the MENU key to boot into the "System 

(throttle /elevator on the top edge, aileron / rudder on the 

Settings" menu,use Up / Down keys to select 

right edge), press the OK key (in this case the maximum 

"Stick calibration" and press OK key to enter the 

value has been calibrated), into the stick minimum (low) 

function interface, as Shown above. Specific 

calibration. 5.When the "low" highlighted, put the stick 

settings, follow these steps: 1.First to use the arrow 

gently leaned on the left (throttle / elevator on the lowest, 

keys to select the edited item, (example aileron 

Aileron / rudder on the left edge), press the OK key (while 

calibration). 2.Put the calibrate joystick placed in the 

the stick minimum calibrated OK). 6.At this memont the 

midpoint of the channel position, options Up / Down - 

bottom of the screen displays "confirmation / reset" and 

key implementation the control calibration . 3.Selection 

press to OK key ,all the calibration is completed, 

into the Figure 3. When the "middle" highlighted, press 

automatically return to the superior menu, use the 

OK key (this time the Point calibrated is OK), into the 

arrow keys selected to re-enter Calibration

stickmaximum (high) calibration. 4.When the "high" 

Procedures.

highlighted, put the stick gently leaned on the right 

1---ileron

2---evator

3---hrottle

4---Rudder

Helicopter Functions

INSTRUCTION MANUAL 

WFT07 REMOTE CONTROL DEVICE

Содержание WFT07






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды