WFCO WF-8700 Series, Руководство оператора

Страница: 11 / 16

Wiring the DC Fuse Board
Make sure the house battery is disconnected before beginning the DC wiring
. Determine
what DC loads are to be connected to the fuse board and what position they will occupy. All
4 circuits on the WF-8712 and WF-8725 Power Centers have up to 20 Amp ATO or ATC
fuses installed. On the WF-8735 and WF-8740 Power Centers, circuits F5 and F6 can be
used for slide-outs or other higher current loads and can have a maximum 30 Amp ATO or
ATC fuse installed. The remaining 4 circuits are general purpose and can have up to 20 Amp
ATO or ATC fuses installed. Make sure the fuses are seated properly.
Figure 5
11