B E L 5 0 7 T
I L T
C
A S E
P
A C K I N G
S
T A T I O N
8
65-14-8 2/19/2007
Body switch
must remain
depressed until
case leaves.
3. Open a case from the flat blank
and insert it into the machine.
Crank in the width adjustment
until the red case hold-down
rollers are lightly gripping the
sides of the case. It should be
easy to insert and remove the
case without forcing but it must
maintain contact on the white
“body “ switch roller until the
case leaves the machine.
4. Re-tighten the hand knobs.
C
ASE
L
ENGTH
1. Remove the case and loosen the clamp at the base of the front minor flap folding “tower “
2. Reinsert the case into the machine and position it ½”
back from the minor flap folder at the exit end of the
machine. Push the tower forwards until it just
contacts the back of the case. Remove the case and
tighten the tower clamp
“Body” switch roller
Case hold-down
roller
Minor flap folding “tower”
