WD-59CT & WD-66CT
Rev. 2.0 (20110124)
Technical information
38
5. Technical information
The technical data, which is specific to each machine, can be found in the ma-
chine's flow, machine and wiring diagrams. These are supplied with each ma-
chine and are on the inside of the electrical cabinet door.
Technical data
WD-59CT WD-66CT
Pump motor, pre-wash (kW)
3
3
Pump motor, chemical wash (kW)
3
3
Pump motor, final rinse (kW)
0.74
0.74
Condensing fan (kW)
0.22
0.22
Fan, drying zone 1 (kW)
0.62
0.62
Fan, drying zone 2 (kW)
---
0.62
Drive motor, belt (kW)
0.15
0.15
Booster heater 1 (kW)
6
6
Booster heater 2 (kW)
12
12
Tank heater, chemical wash (kW)
15
15
Drying zone , heater (kW)
9
9
Heat recovery, cooling surface (m²)
51
51
Heat recovery fan, flow (m³/hour)
900
900
Tank volume, pre-wash tank (litres)
104
104
Tank volume, chemical wash tank (litres)
120
120
Tank volume, final rinse tank (litres)
21
21
Weight, machine in operation (kg)
1500
1560
Enclosure class (IP)
55
55
Capacity and operating data
WD-59CT WD-66CT
Capacity (trays/min)
25
25
Capacity cutlery (cutlery items/min)
75
75
Max. tray size (mm)
530x530
530x530
Cold water consumption, final rinse (litres/min)
5
5
Energy consumption (kWh of connected power)
70-90 %
70-90 %
Steam consumption at 150-250 kPa (kg/hour) *
50
55
Steam consumption at 50-140 kPa (kg/hour) *
50
55
Surface temperature at a room temperature of 20 °C (°C)
35
35
Noise level (dB(A)) **
72
72
-
* When the machine is steam-heated.
** Measured 1 metre from the side of the machine
