Wetelux 88 11 76, Инструкция по эксплуатации

Страница: 15 / 22

11
Set-up and Operation
Mounting
The most important thing when mounting the LED spotlights is to
be aware that it requires
direct sunlight . The more direct
sunlight the solar module receives, the longer the light will
operate.
If the solar spotlight is mounted horizontally, it should be mounted
in a sufficiently covered area so rain water cannot enter the
housing.
Position the power cord securely so it cannot become a tripping
hazard. Do not bend the power cord too much and do not jam the
cord or pull it around edges.
Main Unit
1. Unscrew the mounting screw (10)
from the bottom side of the mounting
plate (7).
2. Push down the spring-loaded pin on
the mounting plate and remove the
mounting plate from the main unit.
3. Mount the plate on the desired
place. For installing the main unit,
use suitable screws and wall plugs
depending on the consistency of the
ground.
4. Re-attach the main unit to the mounting plate and tighten the
mounting screw hand-tight.
Start-up
1. Set the OFF/AUTO switch (9) to the position
OFF .
AUTO Position for normal operation of
the solar spotlight;
Step 1
Step 2