5
Safety Notes
This radio controlled socket-outlet operates in a frequency range
also used by many other wireless applications. For this reason,
do not use the unit for operating e.g. power tools, domestic appli-
ances or other devices that may become a source of danger
when they are unintentionally switched on.
Do not overload the radio controlled socket-outlet. Overloading
may destroy the sockets or cause damages, i.e. fire. The maxi-
mum connected total load must not exceed 3680 W.
ATTENTION! Before undertaking any connection or maintaining
work e. g. changing the illuminant, due to the single-pole cut-off
and the commonly used transmission frequency, the input lead of
the connected consumer load has to be voltage-free! Switching
off the unit with the wireless foot switch alone is not sufficient.
The sockets are voltage-free only if the power plug has been
disconnected from mains.
Only consumers that are ohm resistive loads and inductive loads
powered by 230 V AC are allowed to be operated. Therefore do
not connect washing machines, dryers or similar appliances. Do
not use the radio controlled sockets with electric power tools,
rotating machines or other devices outdoors such as lawnmowers
etc.
If the housing or electrical components become damaged due to
dropping or when moisture enters the housing, do not operate the
unit further more.
Do not disassemble, burn, or short-circuit batteries and do not
attempt to recharge non-rechargeable batteries.
Batteries do not belong in household
garbage.
For battery disposal, please check with
your local council.
