10
Using
5. Use the measuring mode toggle key INC/ABS (8) to toggle the
display modes. The selected mode is indicated on the display
accordingly.
Using the ABS mode, the displayed measuring value is the
abso-
lute number
. Briefly press the ON/OFF key (4) to set the display
to zero. Perform the measurements and read the measuring
results on the display.
Each time you switch to the INC mode, the display is set to zero.
Using the INC mode, the displayed measuring value is the
rela-
tive number
.
6. Briefly press the unit toggle key (3) to select the desired measur-
ing unit mm, Inch or fraction. The selected unit is indicated on the
display accordingly. In fraction mode the “in” icon is flashing and
within 1/32’’ ±0.004 readout will convert the number after the
decimal point into fraction display.
7. If you cannot directly read the measuring value, turn the locking
screw clockwise and lock the scale bar in its place. The measur-
ing result is “frozen” and can be read later.
8. Press and hold the ON/OFF key for approx. 3 seconds to switch
off the device. When not in use for more than 3 minutes, the
device automatically switches off.
