Wetekom 81 82 61, Инструкция по эксплуатации

Страница: 17 / 22

13
Operation
Weighing
1. Use the loop (8) to hang up the scale securely at a place which is
appropriate for the weight to be applied.
2. Use the POWER key to switch on the scale and use the MODE
key to select the desired measuring unit.
3. If the display does not show
0.00
, press the TARE key (3).
4. Hang the item to be weighed securely to the hook (5) of the
scale. Make sure it hangs freely in the air.
5. The currently measured weight is shown on the display. A
“stable” measuring value has been reached when you hear a
short beep sound. The value is held on the display and the word
HOLD appears.
6. Shortly press the TARE key (3) to reset the scale to
0
. Now you
can hang additional items to be weighed on the scale and weigh
them.
7. While weighing shortly press the POWER key (6) to switch on the
background light of the display for a few seconds.
8. Carefully detach the items to be weighed from the scale.
9. Press the POWER key (6) for approx. 1 second to switch off the
scale manually.
Notes:
If the items to be weighed weigh more than 200 kg in total, the
display will show
eEEE
(overload). Quickly remove weights from the
scale to avoid damaging the scale.
The scale will power off automatically after approx. 75 seconds
when it is not in use.