Wet Sounds SINISTER SDX 2500, Руководство пользователя

Страница: 9 / 15

7
SPEAKER CONNECTIONS
Wet Sounds Sinister SDX 2500 Owner’s Manual
SDX2500 Dimensions
SDX2500 Front Plate
SDX2500 Control
22.125”
10.25”
3.0”
The combined total speaker impedance MUST NOT GO BELOW 1 OHM!
Total impedance below 1 Ohm will force the SDX2500 into protect!
You will notice that the SDX 2500 is equipped with two sets of “+” and two sets of
“-” speaker output terminals on the chassis. This is for the installer’s convenience
to accommodate multiple speaker wiring to the SDX2500’s mono block output.
These two positive and two negative connections are connected in parallel inside
the amplifier. Connecting two speakers, each to one set of positive and negative
terminals will result in a parallel speaker connection. If only using one set of
speaker wires, it is not necessary to use both sets of speaker output terminals on
the SDX2500.