Wet Labs ECO FL, Руководство пользователя, Страница: 9 / 30

ECO FL User’s Guide (FL) Revision AN 4 June 2012 3
1.3 Delivered Items
The standard ECO delivery consists of the following:
 the instrument itself
 dummy plug with lock collar
 protective cover for optics
 this user’s guide
 ECOView user’s guide
 ECOView host program and device files (on CD)
 instrument-specific calibration sheet
 FL(RT), FL, FLS only: stainless steel mounting bracket and hardware (See Appendix A
for details)
 Internal battery units: six 9-V Lithium batteries (installed)
Spare Parts
 Fluorescent stick for bench testing
 Bio-wiper ™ units: one 3/32-in. hex key for Bio-wiper ™ removal
 Bio-wiper ™ units: Three 4-40 x 3/8 in. 316 stainless steel screws for securing Bio-wiper ™
Additional spare parts for internal battery units

Two end flange O-rings (size 224) and two vent plug O-rings (size 010)

Two jacking screws for connector flange removal

One 3/32-in. hex key for jacking screws

Blue-tipped power plug for autonomous operation

Three pre-cut segments (7 inches) of 0.036-inch diameter monofilament for end flange

Three pre-cut segments (0.25 inches) of 0.094-inch diameter white nylon bar stock
for replacing the white plastic dowel pin.
1.4 Optional Equipment
1.4.1 Test Cable
A test cable is optionally available with each unit. This cable includes:
1.
An inline connector for providing power to the instrument from a user-supplied 9V
battery.
2. An auxiliary analog out connector.
3. A DB-9 serial interface connector.
4. A six-socket connector for providing power and signal to the instrument.
1.4.2 Copper Faceplate
ECO meters are optionally equipped with copper faceplates to improve the meter’s
resistance to biofouling. Refer to Section 3.5.1 for important details on maintenance and
cleaning.
1.4.3 Bio-wiper ™ and Copper Faceplate
The FLNTUS and FLNTUSB are equipped with an integrated non-contact anti-fouling Bio-
wiper ™ and copper faceplate for use in extended deployments. This wiper can be manually
controlled by a host controller package, or can perform autonomously as part of a pre-
programmed sampling sequence upon instrument power-up. The rate of closure and
opening is dependent upon both temperature and depth.