G O - 4 X T R H y d r a u l i c R e f u s e H a u l e r
O p e r a t o r ’ s M a n u a l
| 44
Contact Westward Industries for Manuals and Documentation. Do not copy.
5.4 Towing
If the vehicle needs to be towed, call a professional towing service.
Since the GO-4 is a 3 wheeled vehicle, extra care should when the vehicle is being towed. The
recommended method to tow or transport this vehicle is using a flatbed truck. Alternatively, the GO-4 can
be loaded onto the decks of various trucks or trailers or be towed using wheel dollies. If towing the vehicle
using wheel dollies, both the rear wheels must be supported by the dollies, as the GO-4 is a rear wheel
drive vehicle.
WARNING:
Never tow vehicle with just a rope or chain. Never tow the vehicle by the method of a
suspension (front or rear) lift.
WARNING:
Always exercise extra caution when towing the vehicle. Be sure to take the following
precautions:
•
Do not permit anyone to ride in the GO-4 while it is being towed.
•
Drive at a reduced speed.
•
Turn slowly and carefully.
•
Avoid any abrupt driving maneuvers.
•
Avoid steep inclines and sharp turns.
WARNING:
Failure to follow proper towing procedures will cause damage to the vehicle and may cause
bodily injury.
5.5 Engine Maintenance
WARNING:
It is recommended to let the engine cool before performing any engine related maintenance.
Be careful when working in the engine bay, even after letting the engine cool, some parts may still be hot
and could cause burns.
WARNING:
To access the engine compartment follow these steps:
1.
Raise the bucket to its highest position.
2.
Install safety prop following the steps in section 5.2 - How to Use the Safety Prop.
