Westric IW Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 68 / 82

76-5276-05 Page 68 of 82
Water supply
Medium - High conductivity limit values for submerged electrode humidifiers
Limits
Min Max
Hydrogen ions pH 7 8.5
Specific conductivity at 20 ° C σR, 20 °C – μS / cm 300 1250
Total dissolved solids TDS – mg / l 1* 1*
Dry waste at 180 ° C R180 - mg / l 1* 1*
Total hardness TH - mg / l CaCO3 100 - 2* 400
Temporary hardness mg / l CaCO3 60 - 3* 300
Iron + Magnesium mg / l Fe + Mn 0 0.2
Chlorides ppm Cl 0 30
Silicon dioxide mg / l SiO2 0 20
Residual chlorine mg / l Cl - 0 0.2
Calcium sulfate mg / l CaSO4 0 100
Metallic impurities mg / l 0 0
Solvents, thinners, soaps, lubricants mg / l 0 0
Water supply Medium
Low conductivity limit values for submerged electrode humidifiers
Limits
Min Max
Hydrogen ions pH 7 8.5
Specific conductivity at 20 ° C σR, 20 °C – μS / cm 125 500
Total dissolved solids TDS – mg / l 1* 1*
Dry waste at 180 ° C R180 – mg / l 1* 1*
Total hardness TH – mg / l CaCO3 50 - 2* 250
Temporary hardness mg / l CaCO3 30 - 3* 150
Iron + Magnesium mg / l Fe + Mn 0 0.2
Chlorides ppm Cl 0 20
Silicon dioxide mg / l SiO2 0 20
Residual chlorine mg / l Cl- 0 0.2
Calcium sulfate mg / l CaSO4 0 60
Metallic impurities mg / l 0 0
Solvents, thinners, soaps, lubricants mg / l 0 0
1*-
Values that depend on the specific conductivity; in general: TDS
≅
0.93 * σ20; R180
≅
0.65 * σ 20
2*-
Not less than 200% of the chloride contained in mg / l of Cl
3*-
Not less than 300% of the chloride contained in mg / l of C
CAUTION
Required wáter flow: 36 l / h
Operation pressure límits: 1 – 8 bar