Westric IW Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 82

76-5276-05 Page 41 of 82
OPERATIONS PANEL - DISPLAY AND KEYBOARD
Illustrative character image subject to modifications
It consists of a graphic display of 88x150mm, illuminated by LEDs, and the keyboard has six buttons.
The parameters, faults, registers, etc. can be displayed and modified through the display and the keyboard.
The display has a system of energy saving that prolongs the useful life of the LEDs that illuminate it, this system is
activated when any key is pressed, the light is turned on, if no key is pressed after a while the illumination lowers its
intensity.
If you stay more than 5 minutes on any screen without pressing any key, the system returns to the main screen (it is the
screen that shows the unit function, temperature, humidity, time and date).
Cleaning the screen:
Use a soft cloth lightly moistened with water.
PLC` LEDs
GREEN -> "Normal" No alarms present.
YELLOW -> "Warning" indicates that there was an alarm. It is normalized by pressing "X" for a few seconds in the alarm
menu.
RED -> "Fail" Indicates that an alarm is present.
PLC management:
On the main screen:

Use the UP and DOWN arrows to scroll through the display screens.

Use the arrow <- (LEFT) to enter the input / output screens.

Press ENTER to access the main menu.

Press X to display the alarms.
On the alarm screen:

X is used to exit.

Press and hold X to clear all alarms that have normalized.

ENTER is held down to clear only the alarm that is displayed (if it has been normalized).