The heat boost can be turned off by pressing until heat setting ´0`
appears.
If the heat boost should be used, it can always be activated by actuating
again if the heat setting is set to level 9. In the heat display ´A/9` flashes.
Turn Off Individual Heaters
A selective heater can be turned off with 3 different ways:
. Simultaneous operation of and buttons
· Reduction of the heat setting to ´0` by operating button
· Use of timer turn off function for the corresponding heater
Simultaneous operation of and buttons
The corresponding heater must be chosen with the
Active/Deactive
Heater Button
, the
Decimal Point
of the related
Heater Display
flashes. To turn off the heater, and must be pressed at the same
time. A buzzer signal sounds and ´0` appears in the heat setting display.
If the timer is active for the selected heater, then ´0` will appear in the
heater display and also the related timer
Cooking Zone Indicator Timer
Function
and the
Timer Display
is turned off.
If there is a residual heat for this heater remaining, this will be indicated
by a static display ´H` in the heat setting display.
Reduction of the heat setting to ´0` by operating button
The heater can also be turned off by reducing the operated heat setting
to ´0`.
When
Heater Display
indicates ´0`, an associated
Decimal Point
of the
heater will also be turned off.
Turning off an active heater, not only the ´0` appears in the
Heater
Display,
but also the related timer
Cooking Zone Indicator
and the
Timer
Display
is turned off.
If there is a residual heat for this heater remaining, this will be indicated
by a static display ´H` in the heat setting display.
12
