The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to
the instructions in this guide and in compliance with the current
regulations.
· Before connecting your appliance to the mains at home, make sure to
check the conformity of voltage settings, which are specified on the
information sticker attached to the appliance and/or packaking, with the
usage conditions available.
· The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its
accessories, ensure that the hob is not damaged. If you suspect any
damage, do not use the appliance and contact an authorised service
personal or a qualified electrician immediately.
· This built-in hob is to be inserted into a cut out of a worktop.
· Create an opening with the dimensions shown in next picture. The
distance between the rear edge of the hob and any adjacent wall is
depend on wall surface. Please don't use easily combustible material like
curtain, paper at nearby hob.
5
INSTALLATION
