6
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
4. Installation & Operation
4.1 Installation
The water bath must be placed on a smooth, level, and sturdy work surface, preferably near
a drain for emptying. Use in a ventilated room. Suitable for use in ambient temperatures 5°C
to 40°C with a maximum humidity 80% (temperature 31°C) decreasing to 50% (temperature
40°C).
DO NOT block or restrict ventilation slots. DO NOT place directly next to hot heat surfaces.
ENSURE that there is sufficient space around the product to allow it to provide optimum
temperature control.
When unpacking the unit, remove the packaging and retain over the warranty period.
Contents consist of:
•
Water Bath
•
Stainless Steel False Base
•
Power Lead
•
Instruction Manual
Place the false base into the bath with the legs down. Fit the power lead into the socket
at the rear.
4.2 Operation
Switch the unit on using the mains switch located on the rear. The switch will illuminate,
and the controller will perform a self-test. When the unit is switched off all time and
temperature values remain in memory.
Setting Temperature:
1. Press and hold the DOWN arrow, or the FUNCTION key to display SP1: the set
temperature. The set temperature indicator will illuminate.
2. Use the UP and DOWN arrow keys to select required temperature.
3. After setting the temperature the display flashes between SP1 and set temperature
value and will then revert to show actual liquid temperature. Heater indicator will
illuminate.
4. The water bath is now set and will heat and control the liquid to set temperature.
Setting Time:
1. Press the FUNCTION key until ‘t’ appears on the display. Display will alternate
between ‘t’ and time displayed as h:mm.
2. Use the UP and DOWN arrows to select time required. Minimum 0 hours 01 minutes:
00:01 and maximum 9 hours 59 minutes: 9:59.
3. Press the FUNCTION key to confirm. The display will flash 4 times then revert to
actual liquid temperature.
